SIP superstructure
Our panellised system is made from 12mm cement bonded particle board and a profiled metal perimeter to enable panel-to-panel connections. The panels are filled with 160mm blown PU foam insulation that bonds the entire panel together and gives it its high structural strength, airtightness, and low U-value of 0.13w/sqm.
Partition walls
Separating walls (party walls)
The same panels as the exterior are used to create party walls, due to their fire-resistance, strength, and acoustic performance properties. They are thinner than traditional party walls, allowing for increased GIFA.
Partition walls (walls within the dwelling)
Typically timber frame construction (89×38 CLS).
Exterior finishes
Any style of exterior finish can be applied to our panel superstructure.
Brick slips – Brick slips are specially manufactured tiles which when installed have the appearance, colour and texture of a real clay brick wall.
Cladding – Any cladding, either natural material or composite, can be added to the panel superstructure so suit the desired aesthetic.
Cement Bonded Particle Board – Made from a mixture of wood particles and cement. Cement board adds impact resistance and strength to the wall surface. It is not actually waterproof, but it is highly resistant to absorbing moisture and has excellent drying properties.
